TL-2000 Asphalt Rejuvenator
Patented single-component restorative formulation engineered to reduce pothole probability, achieve an estimated road service life extension of 5+ years, and protect infrastructure investments with millions of sqf coated worldwide. Delivers a cost-effective, low-carbon preservation solution that significantly reduces CO₂ emissions compared to comparable resurfacing applications by deferring premature road reconstruction. Penetrates at least 42mm into aged asphalt to rejuvenate brittle bitumen, create an impermeable water barrier, seal micro-cracks, and lock loose aggregate.
Core Pavement Preservation Benefits
Proactive road asset preservation that halts pavement decay before expensive structural failures, potholes, and full reconstruction cycles occur.
Reduce Pothole Probability
Creates an impermeable moisture barrier across surface micro-fissures, blocking water, fuel, and de-icing salts. Significantly reduces pothole probability by reducing sub-base freeze-thaw expansion.
Estimated Road Life Extension (5+ Yrs)
Replenishes light aromatic oils (maltenes) stripped away by UV radiation and oxidation. Restores elasticity and ductility to dry, brittle bitumen, yielding an estimated road service life extension of 5+ years and keeping pavement resilient.
Cost-Effective & Low-CO₂ Protection
Delivers an affordable, high-ROI preventive maintenance solution at up to 80% lower lifecycle cost than repeated mill-and-overlay cycles. Significantly reduces CO₂ emissions compared to comparable applications by deferring costly road reconstruction.
Stop Aggregate Raveling
Locks surface aggregate firmly into the asphalt matrix. Stops tire-friction stone loss, preserves surface texture, and completely eliminates cracked windshield claims common with chip seals.
Penetrates at Least 42mm Deep into Aged Asphalt
Unlike water-based emulsions that only paint the surface, solvent-based HALIK TL-2000 penetrates at least 42mm deep into capillary void networks to rejuvenate dry, brittle bitumen.
Clean. Apply. Let Dry.
Applied cold with zero burner fuel. Dries to touch in 45 to 60 minutes (traffic release depends on weather conditions).
Clean
- Sweep or air-blow loose dust
- Surface must be dry to touch
- No structural milling (optional light scarring if friction increase is required)
Apply
- Bitumen distributor truck or manual squeegee
- Applied cold at ~0.8–1.0 kg/m² (about 1 kg/m²)
- Penetrates immediately into capillary pores
Let Dry
- Cures via rapid solvent evaporation
- No roller compaction or chipping
- Dry to touch in 45–60 min (traffic release depends on weather)
Manual Application is Possible
While highway and municipal projects deploy automated bitumen distributor trucks, manual application is fully possible and practical for smaller projects, pedestrian walkways, parking lots, tight urban intersections, curb edge detail work, and areas inaccessible to heavy machinery.
Rapid 45-Minute Dry Time & Return to Service
Fast-curing formulation dries to touch in 45–60 minutes, eliminating protracted lane closures and dangerous loose gravel.
Return-to-Service Comparison
TL-2000 dries to touch within 45 to 60 minutes. Full traffic release typically occurs shortly thereafter, depending on weather conditions (ambient temperature, wind, and sun exposure).
No Loose Stone Throw & Non-Tracking Surface
Unlike aggregate-scatter chip seals that shower motorists with loose rock chips, TL-2000 wicks completely into surface voids:
- Zero Loose Stone Throw: Eliminates broken windshield claims and motorist tire-throw hazards.
- Non-Tracking Polymer: Cured binder will not pick up onto vehicle tires or track onto concrete curbs.
- Fast Surface Turnover: Once dry to touch, the road returns cleanly to service without requiring loose chip sweeping.
Multiple Substrates & Extreme Barrier Performance
Proven field durability across critical airport infrastructure, unpaved rural routes, decorative color-coded lanes, and extreme hydrostatic water pressure.
Airfields & Runways
Deep-penetrating seal that binds surface aggregates and halts oxidation while locking down micro-cracks with an impermeable seal.
Soil & Gravel Roads
Binds loose unpaved aggregates into a resilient water-resistant crust, suppressing dust and significantly reducing rain washouts on rural corridors.
Custom Colors
Available in custom colors (Red, Terracotta, Grey, Black) for dedicated transit corridors, bus lanes, cycle paths, and architectural pavements.
150 cm Hydrostatic Barrier
Tested under a 150 cm standing water pressure column by ITST Vietnam with 0.0% water penetration after 30+ minutes, creating a completely impermeable moisture shield.
Standard Specifications & KP Logistics
Manufactured by HALIK LTD. Shipped worldwide in UN-rated industrial containers.